Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
Front Hood Molding
Front Hood Molding, For use with hood crest (You will have to notch the molding to fit over the crest)
Bug (Type 1): 10/1952-63 (Through chassis # 5010447)
No customer reviews for the moment.
Part #: T1198088
This cheap tool allows you to get the cylinder barrels over the pistons and rings.
Application:Part #: 211611069CGR
Front Left Wheel Cylinder (2 Required) 25mm GERMANY
Application:Part #: 113845521ACL
This seal is for the rear window.
Application:Part #: 1903531
On all upright motor, this plastic cover goes over the top opening of the generator to keep dirt out.
Application:Part #: 111707197A
These grommets go on the fenders or the body where the bumper brackets go through..
Application:Part #: 211501149
The CV joint boot seals in the grease and seals out the dirt.
Application:Part #: 311201219A
This hose goes from the filler neck to the tank.
Application:Part #: 1615106D
Replacement Front Brake Rotor 5/205, 5/130 for Kit 1615100E
Application:Part #: 111601139
These bolts hold the wheel on.
Application:Part #: 6801112
These tabs are used for mounting just about anything to tubing..
Application:Part #: WG350040
2 1/16" Oil Pressure gauge, with sending unit. NOW AVAILABLE. The sending unit has two poles. One for the gauge and one for the OEM idiot light.
Application:Part #: 113119317
These are also known as the "forget-me-nots".
Application:Part #: 111951111H
This little unit goes beep-beep.
Application:Part #: 6401234
These go from the front beam to the belly pan to strengthen the front beam area.
Application:Part #: 1251200
This kit comes with four flanges, two for the heater boxes and two for the header. Sold EACH, 2 required.
Application:Part #: 111115175A
This screen fits in the sump around the pick up tube.
Application:
Front Hood Molding
