Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
Bracket Support Base Seals
Bracket Support Base Seals
Ghia: 1958-71
No customer reviews for the moment.
Part #: 311831439A
These pins are in the door hinges.
Application:Part #: 111701409A
Battery Strap Hook
Application:Part #: N110086
Some of the more common nuts you might need..
Application:Part #: 211813259C
Engine door catch plate
Application:Bus (Type 2); 72-79
Part #: 151867505
This is the vinyl covering for the inside roof and sides of the Bug.
Application:Part #: 211813355GWW
Rear Lower Corner, Left, from bottom to beltline
Application:Part #: 113131617C
This is a smog device.
Application:Part #: 6721355RD
Clutch Slave cylinder billet
Application:Part #: N125321
These are some of the more common cotter pins.
Application:Part #: 1707155
These are the guards on the front and rear bumpers.
Application:Part #: 1119026BK
This style fan shroud combines the small shroud of the 36hp and the later doghouse style shroud.
Application:Part #: 131711741B
This knob fits on the heater control.
Application:Part #: 112950505IDF
Throttle Shaft Lock Tab Washer for 40/44 HPMX (EMPI), 40-48 IDF (Weber)
Application:Part #: 111198029
This stock oil cooler cools the hot oil coming from the engine.
Application:Part #: 1601153
Replacement Cap, EMPI Logo, Push-On Chrome, 5/8" Inside Height
Application:
Bracket Support Base Seals