Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:Door window to Quarter Pillar Upright Seal (Pair)
Door window to Quarter Pillar Upright Seal (Pair)
Ghia: 1956-59 (Sedan only)
No customer reviews for the moment.
Part #: 1129039
This is a good, cheap dual carburetor kit for a 1600cc motor.
Application:Part #: 1415802B
This is a great way to dress up the front end of your car.
Application:Part #: 211415802F
These two rods go from the center pin on a Bus or the pitman arm on a Bug, to the spindles, making the car turn.
Application:Part #: 113105219
Crankshaft Spacer Ring
Application:Part #: 111813311
Channel, Hood and Engine Weatherstrip, 43" Length
Application:Part #: 021109601A
The two inside valves in the head are the intake valves, which let the gas into the combustion chamber.
Application:Part #: 6611795
A two pound residual pressure valve is recommended for disc brake applications while a 10 pound valve is mostly used on drum brake applications..
Application:Part #: 113837205M
These are the front door handles.
Application:Part #: 113611723J
These are the metal brake lines found throughout the car.
Application:Part #: APWG230R
We now have new racing t-shirts in stock! Available in black or red
Application:Part #: 1119025CH
This style fan shroud combines the small shroud of the 36hp and the later doghouse style shroud.
Application:Part #: 1127022
This block off is used in conjunction with electric fuel pumps and mounts in place of the manual fuel pump.
Application:Part #: 6703113B
The offset hole location of the padding allows it to be positioned to provide more protection where you want it.
Application:Part #: 1129512
Empi Hex Bar Linkage for 48/51 EPC and 48 IDA (works with and without Air Cleaners)
Application:Part #: N144021
Some of the most common studs you might need.
Application: