Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
These cylinder head tins sit under the fan shroud.
These cylinder head tins sit under the fan shroud. They're not great, but they'll work with some custom fitting. Sold in pairs.
Bug (Type 1): 1500-1600
Bus (Type 2): 1500-1600
Ghia: 1500-1600
Race/Off-Road: 1500-1600
No customer reviews for the moment.
Part #: 1119431CH
These are the two pieces of tin that attach to a doghouse style fan shroud.
Application:Part #: 1119525CH
This tin goes from one piece of cylinder tin to the other.
Application:Part #: 1119533CH
This tin goes behind the crank pulley.
Application:Part #: 043119350B
Heater Channel Tin Upper Right
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 1119528CH
This tin goes from one piece of cylinder tin to the other.
Application:Part #: 1119028BK
This small fan shroud came on the 36hp motor.
Application:Part #: 1119352BK
These three pieces of tin go from the heater boxes to the case.
Application:Part #: 1119025CH
This style fan shroud combines the small shroud of the 36hp and the later doghouse style shroud.
Application:Part #: 1119026CH
This style fan shroud combines the small shroud of the 36hp and the later doghouse style shroud.
Application:Part #: 1119027BK
This small fan shroud came on the 36hp motor.
Application:Part #: 1119023
This spacer kit uses 1 1/4" thick aluminum spacers to close the gap between the fan shroud and the cylinder tins where the sheet metal screw attaches.
Application:Part #: 1119303BK
These cylinder head tins sit under the fan shroud.
Application:Part #: 1119517BK
This piece of tin goes behid the engine towards the flywheel and screws down to the cylinder tins.
Application:Part #: 1119525BK
This tin goes from one piece of cylinder tin to the other.
Application:Part #: 111119571
In the stock front pulley tin, there is a hole for the 1" hose coming down from the stock air cleaner.
Application:
These cylinder head tins sit under the fan shroud.
