Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
Replacement Oil Cap Billet Red
Replacement Oil Cap Billet Red
Bug (Type 1): 40hp-1600
Bus (Type 2): 40hp-1600
Ghia: 40hp-1600
Thing: 40hp-1600
Race/Off-Road: 40hp-1600
No customer reviews for the moment.
Part #: N110085
Some of the more common nuts you might need..
Application:Part #: 2117004
This adapter is used to mount an oil filter either by itself or in line with an oil cooler.
Application:Part #: 1115457BK
The smooth flow design has a nice look and comes with a knurled cross-groove or smooth billet grooved cap for a good grip when it is wet or oily. Black
Application:Part #: 1117108
When plumbing the oil filter, oil cooler and/or case, these are the fittings you will need.
Application:Part #: 1117012
These bolt on mounts allow you to bolt the filter adapter under the driver's side fender or hang it off the exhaust flange..
Application:Part #: 1115456
The smooth flow design has a nice look and comes with a knurled cross-groove or smooth billet grooved cap for a good grip when it is wet or oily.
Application:Part #: 111115475A
Oil Filler Seal, 25-36 HP
Application:Part #: 111115450
Vapor Baffle 25-36 HP
Application:Part #: 1115105E
Oil Pick Up Tube Cut To Length
Application:Part #: 113117321
Hoover Bit, Oil Cooler Sealing Frame
Application:Part #: 1115106
A great way to increase the oil capacity of your engine is to bolt on a deep sump.
Application:Part #: 311115107HD
The oil pump is the heart of the engine, so it is very important to choose the right one.
Application:Part #: 1117098
When plumbing the oil filter, oil cooler and/or case, these are the fittings you will need.
Application:Part #: 1117109B
Billett Oil Cooler Block Off
Application:Part #: 1115467HO
This is a breather box that will give excess "blow by" a place to go.
Application:Part #: 1117023
Mesa coolers are the state of the art oil coolers.
Application:
Replacement Oil Cap Billet Red
