Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:Front Nose Panel just below windshield mounts
Front Nose Panel just below windshield mounts
Bus (Type 2): 55-67
No customer reviews for the moment.
Part #: 113837410A
Vent Window Division Bar, Right
Application:Part #: 211711629F
Heater cables open the flaps in the heater boxes allowing heat into the car.
Application:Part #: 111198541HD
The cam rides in these bearings.
Application:Part #: 211721374
Clutch Cable Lever
Application:Part #: 151871349B
This sels the leading edge of the top to the front window frame..
Application:Part #: 1101481BWG
Replacement O-Ring Stock for Billet Valve Covers (Pair)
Application:Part #: 09001P
The plug wires run from the distributor cap to the spark plugs and coil.
Application:Part #: 021109335C
These tubes go from the case to the heads to house the push rods.
Application:Part #: JC22660
Jaycee Street Oil Filter Bracket, Black
Application:Part #: 111863010
These are the interior panels.
Application:Part #: 151837433A
This is the channel that the front door windows roll up into.
Application:Part #: 1903109BIL
Billet Aluminum Pulley - 12 volt alt/gen
Application:Part #: 1105305
This washer is larger in diameter than stock so it gives you more surface coverage over the dowel pins.
Application:Part #: 1129720
Intake Gasket for CB's Competition Eliminator Cylinder Heads or super flow.
Application: