Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N109052
Screws for replacement pop out window frames. These screws are for joining the two Popout frame halves together
Application:This screen fits in the sump around the pick up tube.
This screen fits in the sump around the pick up tube. It's more of a rock catcher than anything else. We recommend an external filter in conjunction with the screen. Used screens are fine as long as they are clean.
Bug (Type 1): 54-60
Bus (Type 2): 50-59
Ghia: 56-60
No customer reviews for the moment.
Part #: 1115142HD
This oil pump cover comes with a threaded boss.
Application:Part #: 1115465
This air filter is made to protect the crankcase.
Application:Part #: 1117110
This adapter replaces the stock oil cooler with two hoses to reroute the oil to an external oil cooler.
Application:Part #: 311115541
This boot goes on the end of the dump tube.
Application:Part #: 1115421
These stronger springs were designed to boost the oil pressure in your motor.
Application:Part #: 1115450BC
Replacement Oil Cap Billet Polished
Application:Part #: 113115451D
Oil Filler with Tube
Application:Part #: 1117103ALM
These fittings are used for the stainless steel hose.
Application:Part #: 1117012
These bolt on mounts allow you to bolt the filter adapter under the driver's side fender or hang it off the exhaust flange..
Application:Part #: 1117102
When plumbing the oil filter, oil cooler and/or case, these are the fittings you will need.
Application:Part #: 1115457
The smooth flow design has a nice look and comes with a knurled cross-groove or smooth billet grooved cap for a good grip when it is wet or oily.
Application:Part #: 1115449BL
Replacement Oil Cap Billet Blue
Application:Part #: 1115610RD
Billet Dipstick, Red
Application:Part #: JC22230
Jaycee Billet Oil Cap with Breater -8 AN Fitting, Blue
Application:Part #: 1115420
This is one way to adjust your oil pressure.
Application:Part #: 043115531A
Oil Filler with Cap
Application: