
Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N141212
These are the latches that hold the popout frame out.
Application:2 1/16" Oil temp gauge with sending unit. AVAILABLE NOW.
This is our own line of gauges. We tried our best to get them to look like the OEM gauges so they will all match. I am a big proponent of having three gauges in the car. Tach, oil press and oil temp. This way you know your getting in trouble before your in trouble. On the oil temp, I have found the that you can get it as hot as 200 but 212 is to hot. With that said i have put color lines on the gauge. That way you know where your at temp wise. This gauge goes hand and hand with the other two gauges, tach and oil pressure.
No customer reviews for the moment.
Part #: VDO240855
This T-adapter is needed to hook up the oil pressure and oil temperature gauges.
Application:Part #: WG333959
2 1/16" Tach. AVAILABLE NOW
Application:Part #: WG350040
2 1/16" Oil Pressure gauge, with sending unit. NOW AVAILABLE. The sending unit has two poles. One for the gauge and one for the OEM idiot light.
Application:Part #: 144863713
This is a full carpet kit.
Application:Part #: 131415801F
These two rods go from the center pin on a Bus or the pitman arm on a Bug, to the spindles, making the car turn.
Application:Part #: 141885375
This is the padding that sits on top of the springs of the seat.
Application:Part #: 2251008
We like to run EMPI deluxe headers because they have the best fit, as well as, a good merge on the collector.
Application:Part #: 1711103
The aftermarket shifters listed here, shorten the shift pattern considerably.
Application:Part #: 211798003A
Rear Bumper Bolt Kit
Application:Part #: 211501303
Reduction box, Rear Axle Bearing Spacer, 1 per side
Application:Part #: 1411299
Have you ever fought the stock sway bar clamps? If you're replacing a sway bar, you might think about these clamps because they're much easier to put on.
Application:Part #: 231069411
These rubber kits are for restoring your camper style windows..
Application:Part #: 111827517B
This is the seal that goes under the deck lid handle..
Application:Part #: 211809159A
This is the short rocker that goes behind the side cargo doors to the fender skirt.
Application:Part #: 151867503
This is the vinyl covering for the inside roof and sides of the Bug.
Application:Part #: 143823531BBK
This the cable you pull to release the front hood.
Application:Part #: N139401
Side Reflector Screws, sold as a pair
Application:Part #: 6801207
Universal Reservoir Mount Tab, Each
Application:2 1/16" Oil temp gauge with sending unit. AVAILABLE NOW.