Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N141212
These are the latches that hold the popout frame out.
Application:
2 1/16" Tach. AVAILABLE NOW
This is our own line of gauges. We tried our best to get them to look like the OEM gauges so they will all match. I am a big proponent of having three gauges in the car. Tach, oil press and oil temp. This way you know your getting in trouble before your in trouble. On the Tach i like to cruise my car between 3200 and 3800. That's not to say you can't take if above that; what I'm saying, is you don't want to hold the RPMs above that.
No customer reviews for the moment.
Part #: WG350040
2 1/16" Oil Pressure gauge, with sending unit. NOW AVAILABLE. The sending unit has two poles. One for the gauge and one for the OEM idiot light.
Application:Part #: WG310012
2 1/16" Oil temp gauge with sending unit. AVAILABLE NOW.
Application:Part #: 221817793GY
Fresh Air Flap Control Knob, Gray
Application:Part #: 1857104
This durable, plastic box replaces the stock cardboard glovebox.
Application:Part #: 111857550
These are the visors you pull down to keep the sun out of your eyes.
Application:Part #: 651300426
Suspension Limit Straps 26", Pair
Application:Part #: 141837277
These wedges align the door so the door latch and striker line up as you close the door.
Application:Part #: 113101353ERB
All of our rebuilt cylinder heads are built from non-cracked or non-welded head cores (rebuilt welded heads will usually crack again next to the weld). Due to a shortage of cores we will need your Cylinder head Cores before sending any Rebuilt heads.
Application:Part #: 112920234
34mm Main Venturi for 40/44 HPMX (EMPI), 44 IDF (WEBER)
Application:Part #: 4857100
This durable, plastic box replaces the stock cardboard glovebox.
Application:Part #: 221845301A
This the glass for the non pop out windows.
Application:Part #: 241863711E
This rubber mat goes on the front floor.
Application:Part #: 211837257B
Door check rod pin
Application:Bus (Type 2); 77-79
Part #: 1109401125
Rocker Arms, High Ratio 1.25, w/Bushing, Set
Application:Part #: 021115487
It caps the hole you are aiming at while pouring oil over everything else.
Application:Part #: 113863374D
These rear kick panels go between the rear seat frame and floor.
Application:Part #: 113845521AAM
This seal is for the rear window.
Application:
2 1/16" Tach. AVAILABLE NOW
