Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
This air cleaner is a sealed unit; the top and bottom do not come off, but they're washable.
This air cleaner is a sealed unit; the top and bottom do not come off, but they're washable. There is no tube for the crank case breather, so we suggest you buy a breather filter as well.
Bug (Type 1): 1600
Bus (Type 2): 1600
Ghia: 1600
Thing: 1600
Race/Off-Road: 1600
No customer reviews for the moment.
Part #: 1129702
EMPI EPC 34 or ICT Manifold kit for Dual Port Type 1 Engines
Application:Part #: 1127110ALM
This is stainless steel braided fuel line.
Application:Part #: 1129605EL
This air cleaner takes the place of a stock air cleaner.
Application:Part #: 111198553
Fuel pump rear for 40hp repair kit.
Application:Bug (Type 1); 40hp
Bus (Type 2); 40hp
Ghia: 40hp
Part #: 1129607
This air cleaner takes the place of a stock air cleaner.
Application:Part #: 1129606
This air cleaner takes the place of a stock air cleaner.
Application:Part #: 1129709
This pair of aluminum end castings are for use with a center section manifold.
Application:Part #: 1129025
This is a new aftermarket UNIVERSAL intake manifold for Dual Port Engines. You can use a 30 Pict1 or 34Pict3 Carburetor. We have had major icing problems with this part and prefer stock manifolds.
Application:Part #: 1129602EL
This air cleaner takes the place of a stock air cleaner.
Application:Part #: 1129708
This pair of aluminum end castings are for use with a center section manifold.
Application:Part #: 111198555
This kit allows you to rebuild your square top or 40hp fuel pump.
Application:Part #: 0280160200
Fuel Pressure Regulator for later air cooled Bugs and Buses
Application:Part #: 113127521AWG
This metal line goes from the pump around the fan shroud to the flex line that comes from the gas tank.
Application:Part #: VCP25
This is a rubber plug that is used to plug off vacuum.
Application:Part #: 1127103ALM
This is stainless steel braided fuel line.
Application:Part #: 1129809K
Kadron Air Cleaner Base Gasket (Pair)
Application:
This air cleaner is a sealed unit; the top and bottom do not come off, but they're washable.