Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
This is stainless steel braided fuel line.
This is stainless steel braided fuel line. We do not recommend this line unless you are using the screw in fittings everywhere. Don't use clamps because they're too loose and might come off. The hose size is 6AN.
Bug (Type 1): All
Type 3: All
Ghia: All
Thing: All
Race/Off-Road: All
No customer reviews for the moment.
Part #: 113129701K
Single Port, Intake Manifold, 1500-1600cc, 30mm Base
Application:Part #: 1129729BKKIT
Dual Port Installation Kit utilizing Black Urethane Boots
Application:Part #: 111127541
8mm Fuel Line Union Nut
Application:Part #: 043133241
These two boots connect the intake manifold with the end casting on a stock dual port 1600cc engine.
Application:Part #: 111127591A
Fuel Line Grommet 8mm
Application:Part #: 1129605EL
This air cleaner takes the place of a stock air cleaner.
Application:Part #: 1129025
This is a new aftermarket UNIVERSAL intake manifold for Dual Port Engines. You can use a 30 Pict1 or 34Pict3 Carburetor. We have had major icing problems with this part and prefer stock manifolds.
Application:Part #: 043129617A
Air Intake Boot for Fuel Injection
Application:Part #: 311129707
These are the gaskets used between the intake manifold and the cylinder head.
Application:Part #: 113127307
This rod drives the fuel pump.
Application:Part #: 1129612
Single Air Cleaner
Application:Part #: 1129708
This pair of aluminum end castings are for use with a center section manifold.
Application:Part #: N138231
These are the gaskets used between the intake manifold and the cylinder head.
Application:Part #: 113129717LRG
Dual Port Gaskets without Pin Holes
Application:Part #: 1127109
This is a brass tee for dual carbs.
Application:Part #: 1127101ALF
This is stainless steel braided fuel line.
Application:
This is stainless steel braided fuel line.
