Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
Outerwear pre-filters feature a patented; Micro Mesh nylon filtration system that stops sand and dirt before it gets to your air cleaner element.
Outerwear pre-filters feature a patented; Micro Mesh nylon filtration system that stops sand and dirt before it gets to your air cleaner element. It stretches over your air cleaner and requires no carb adjustment. Measurements are width by length by height.
Off-Road: Red
No customer reviews for the moment.
Part #: 113129710D
Dual Port Manifold End Casting - Right
Application:Part #: 1127100
Hose Clamp for 5mm hose
Application:Part #: 1129611
This is a good, cheap dual carburetor kit for a 1600cc motor.
Application:Part #: 6129650596BL
Outerwear pre-filters feature a patented; Micro Mesh nylon filtration system that stops sand and dirt before it gets to your air cleaner element.
Application:Part #: 1127102ALF
This is stainless steel braided fuel line.
Application:Part #: 113198729BS
Dual Port Installation Kit-Red
Application:Part #: 1129701W
EMPI Deluxe Dual HPMX or IDF Manifold kit
Application:Part #: 6129652BK
Outerwear pre-filters feature a patented; Micro Mesh nylon filtration system that stops sand and dirt before it gets to your air cleaner element.
Application:Part #: 1127109
This is a brass tee for dual carbs.
Application:Part #: 113129729BS
These boots connect the intake manifold with the end casting on a stock dual port 1600cc engine. Two are required boots are sold individually.
Application:Part #: 113127307
This rod drives the fuel pump.
Application:Part #: 113127307A
This rod drives the fuel pump.
Application:Part #: 1129708
This pair of aluminum end castings are for use with a center section manifold.
Application:Part #: 1127112
This regulator adjusts the fuel pressure to you carburator.
Application:Part #: 1127027
This regulator adjusts the fuel pressure to you carburator.
Application:Part #: 1127103ALM
This is stainless steel braided fuel line.
Application:
Outerwear pre-filters feature a patented; Micro Mesh nylon filtration system that stops sand and dirt before it gets to your air cleaner element.
