Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:This is a replacement air cleaner for the Weber IDF.
This is a replacement air cleaner for the Weber IDF. When they get dirty, just wash them in dish soap and let them drip dry. Once they're dry, reoil and pop them back on. Never use air to blow them out or you will ruin them. They are sold each.
Bug (Type 1): All
Bus (Type 2): All
Thing: All
Race/Off-Road: All
No customer reviews for the moment.
Part #: 1129025
This is a new aftermarket UNIVERSAL intake manifold for Dual Port Engines. You can use a 30 Pict1 or 34Pict3 Carburetor. We have had major icing problems with this part and prefer stock manifolds.
Application:Part #: 1127023
This block off is used in conjunction with electric fuel pumps and mounts in place of the manual fuel pump.
Application:Part #: 1129602EL
This air cleaner takes the place of a stock air cleaner.
Application:Part #: N138211
These are the gaskets used between the intake manifold and the cylinder head.
Application:Part #: 1127025A
This electric pump replaces your stock pump.
Application:Part #: 113129701K
Single Port, Intake Manifold, 1500-1600cc, 30mm Base
Application:Part #: 113127311
These stock pumps pump fuel into the carburetor.
Application:Part #: 113127025D
These stock pumps pump fuel into the carburetor.
Application:Part #: N138231
These are the gaskets used between the intake manifold and the cylinder head.
Application:Part #: 61316
These stock pumps pump fuel into the carburetor.
Application:Part #: 113127025G
These stock pumps pump fuel into the carburetor.
Application:Part #: 113127307A
This rod drives the fuel pump.
Application:Part #: 113127313
These stock pumps pump fuel into the carburetor.
Application:Part #: 1129702
EMPI EPC 34 or ICT Manifold kit for Dual Port Type 1 Engines
Application:Part #: 1129611
This is a good, cheap dual carburetor kit for a 1600cc motor.
Application:Part #: 1127109
This is a brass tee for dual carbs.
Application: