Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
These are the gaskets used between the intake manifold and the cylinder head.
These are the gaskets used between the intake manifold and the cylinder head. We prefer using paper gaskets on dual port motors. If for any reason you take off the intake manifold, you will need to replace these gaskets. Note: If you have a single port engine, tighten the heat risers before you tighten the intake at the ports.
Bug (Type 1): All
Bus (Type 2): All
Ghia: All
No customer reviews for the moment.
Part #: 1129607
This air cleaner takes the place of a stock air cleaner.
Application:Part #: 111127531A
6mm Fuel Line Ferrule
Application:Part #: 113127025BCD
These stock pumps pump fuel into the carburetor.
Application:Part #: 1129601
This is a replacement air cleaner for the Weber IDF.
Application:Part #: 1129709
This pair of aluminum end castings are for use with a center section manifold.
Application:Part #: 1129601HD6
This is a replacement air cleaner for the Weber IDF.
Application:Part #: 1129717
These gaskets are for upright dual port engines.
Application:Part #: 1129729BK
These boots are better than stock.
Application:Part #: 1129729RD
These boots are better than stock.
Application:Part #: 113127521AWG
This metal line goes from the pump around the fan shroud to the flex line that comes from the gas tank.
Application:Part #: 1129604
This air cleaner takes the place of a stock air cleaner.
Application:Part #: 1127112
This regulator adjusts the fuel pressure to you carburator.
Application:Part #: 111127541A
6mm Fuel Line Union Nut
Application:Part #: 1129611
This is a good, cheap dual carburetor kit for a 1600cc motor.
Application:Part #: 1129809K
Kadron Air Cleaner Base Gasket (Pair)
Application:Part #: 1127110
This is a brass tee for dual carbs.
Application:
These are the gaskets used between the intake manifold and the cylinder head.