Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
This adapter replaces the stock oil cooler with two hoses to reroute the oil to an external oil cooler.
This adapter replaces the stock oil cooler with two hoses to reroute the oil to an external oil cooler. This allows you to mount an external oil cooler without machining the case. We do not recommend this method, unless you're using a big external oil cooler with a big fan attached. There are two styles of by-pass adapters. The old style took the stock type oil seals and the new style takes a gasket. If your by-pass has a shoulder in the oil passage, it takes the stock seals. If yours is just straight holes, then you use the gasket. Kits come with the correct seal type.
Bug (Type 1): 40hp-1600
Bus (Type 2): 40hp-1600
Ghia: 40hp-1600
Thing: 40hp-1600
Race/Off-Road: 40hp-1600
No customer reviews for the moment.
Part #: N138171
Oil pressure relief gasket
Application:Part #: 1115183BK
This plate is made out of a solid piece of aluminum. Black
Application:Part #: 111115175B
This screen fits in the sump around the pick up tube.
Application:Part #: 113115181A
This is the plate on the bottom of the motor.
Application:Part #: 1115107FF
30mm Oil pump for Dual Relief & Flat cam Full Flowed Engines
Application:Part #: JC22230
Jaycee Billet Oil Cap with Breater -8 AN Fitting, Blue
Application:Part #: 1117007
This is the high-temp/pressure hose used for routing oil to coolers and filters.
Application:Part #: 1115142HD
This oil pump cover comes with a threaded boss.
Application:Part #: 1115349
This plate will block off the type 3 oil filler hole in a universal case.
Application:Part #: 311115541
This boot goes on the end of the dump tube.
Application:Part #: 111115107B
The oil pump is the heart of the engine, so it is very important to choose the right one.
Application:Part #: 113115193
This is the bolt that goes in the plate on the bottom of the motor.
Application:Part #: 1117011
These bolt on mounts allow you to bolt the filter adapter under the driver's side fender or hang it off the exhaust flange..
Application:Part #: 311115175A
This screen fits in the sump around the pick up tube.
Application:Part #: N122412
This is a general rule for washer use, wafer washers are used against aluminum and lock washers are used against steel..
Application:Part #: 111117151
This stock oil cooler cools the hot oil coming from the engine.
Application:
This adapter replaces the stock oil cooler with two hoses to reroute the oil to an external oil cooler.
