Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
A stock cap that has been chromed for looks..
A stock cap that has been chromed for looks.
Bug (Type 1): 1200-1600
Bus (Type 2): 1200-1600
Ghia: 1200-1600
Thing: 1200-1600
Race/Off-Road: 1200-1600
No customer reviews for the moment.
Part #: 1117007
This is the high-temp/pressure hose used for routing oil to coolers and filters.
Application:Part #: 1115107FF
30mm Oil pump for Dual Relief & Flat cam Full Flowed Engines
Application:Part #: 1117100
When plumbing the oil filter, oil cooler and/or case, these are the fittings you will need.
Application:Part #: 111115175A
This screen fits in the sump around the pick up tube.
Application:Part #: 1117103ALM
These fittings are used for the stainless steel hose.
Application:Part #: 1117022
Mesa coolers are the state of the art oil coolers.
Application:Part #: 111117021ERB
This stock oil cooler cools the hot oil coming from the engine.
Application:Part #: 1115457RD
The smooth flow design has a nice look and comes with a knurled cross-groove or smooth billet grooved cap for a good grip when it is wet or oily. Red
Application:Part #: 1117699
When mounting the oil cooler above the transmission on a Bug, Type 3, Ghia, Thing, or Off Road car you can use these rubber mounted studs.
Application:Part #: 1115611
Chrome dipsticks come in different lengths and styles..
Application:Part #: 1119031
Replacement fan
Application:Part #: 111115111A
The oil pump is the heart of the engine, so it is very important to choose the right one.
Application:Part #: 1115467HO
This is a breather box that will give excess "blow by" a place to go.
Application:Part #: 1115142HD
This oil pump cover comes with a threaded boss.
Application:Part #: 1117007SS
This is the high-temp/pressure hose wrapped with braided stainless steel.
Application:Part #: 111115487
It caps the hole you are aiming at while pouring oil over everything else.
Application:
A stock cap that has been chromed for looks..
