Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
The oil pump is the heart of the engine, so it is very important to choose the right one.
The oil pump is the heart of the engine, so it is very important to choose the right one. When ordering a pump you will need to know if your case is a single or dual relief, if you have a dished or a flat cam and if you want a standard or heavy duty pump. Remember that you can only pump so much oil through a certain size hole, so be careful in ordering a heavy duty pump. We feel that any pump with gears larger than 30mm is a waste of money. Note: When replacing a pump make sure you use four new sealing nuts.
Bug (Type 1): 68-69
Bus (Type 2): 68-69
Type 3: 68-69
Ghia: 68-69
Race/Off-Road: 68-69
No customer reviews for the moment.
Part #: 1117024FAN
This is the same as the mesa cooler but with a fan mounted to it.
Application:Part #: 111115175A
This screen fits in the sump around the pick up tube.
Application:Part #: 1115610BK
Billet Dipstick, Black
Application:Part #: 1115422
These stronger springs were designed to boost the oil pressure in your motor.
Application:Part #: 111115450
Vapor Baffle 25-36 HP
Application:Part #: JC22280
Jaycee Billet Oil Cap with Breater -10 AN Fitting, Silver
Application:Part #: 1117106
When plumbing the oil filter, oil cooler and/or case, these are the fittings you will need.
Application:Part #: 111115111A
The oil pump is the heart of the engine, so it is very important to choose the right one.
Application:Part #: 1115183BK
This plate is made out of a solid piece of aluminum. Black
Application:Part #: 1117007SS
This is the high-temp/pressure hose wrapped with braided stainless steel.
Application:Part #: 1117113
This adapter replaces the stock oil cooler with two hoses to reroute the oil to an external oil cooler.
Application:Part #: N122412
This is a general rule for washer use, wafer washers are used against aluminum and lock washers are used against steel..
Application:Part #: 1117007
This is the high-temp/pressure hose used for routing oil to coolers and filters.
Application:Part #: 1115107AFF
26mm Oil pump for dual relief case with a flat cam. For full flowed motors only.
Application:Part #: 1117098
When plumbing the oil filter, oil cooler and/or case, these are the fittings you will need.
Application:Part #: 111198029
This stock oil cooler cools the hot oil coming from the engine.
Application:
The oil pump is the heart of the engine, so it is very important to choose the right one.
