Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
The oil pump is the heart of the engine, so it is very important to choose the right one.
The oil pump is the heart of the engine, so it is very important to choose the right one. When ordering a pump you will need to know if your case is a single or dual relief, if you have a dished or a flat cam and if you want a standard or heavy duty pump. Remember that you can only pump so much oil through a certain size hole, so be careful in ordering a heavy duty pump. We feel that any pump with gears larger than 30mm is a waste of money. Note: When replacing a pump make sure you use four new sealing nuts.
Bug (Type 1): 61-67
Bus (Type 2): 60-67
Type 3: 62-67
Ghia: 61-67
Race/Off-Road: 61-67
No customer reviews for the moment.
Part #: JC22220
Jaycee Billet Oil Cap with Breater #8 AN Fitting, Black
Application:Part #: 1117103ALM
These fittings are used for the stainless steel hose.
Application:Part #: 1117109
This block off plate is made to loop the oil back into the case in place of the stock oil cooler.
Application:Part #: JC22250
Jaycee Billet Oil Cap with Breater -10 AN Fitting, Red
Application:Part #: 1115183
This plate is made out of a solid piece of aluminum.
Application:Part #: JC22210
Jaycee Billet Oil Cap with Breater #8 AN Fitting, Red
Application:Part #: 111115495
This is more of a bolt than a nut.
Application:Part #: 1117024
Mesa coolers are the state of the art oil coolers.
Application:Part #: 113117321
Hoover Bit, Oil Cooler Sealing Frame
Application:Part #: 111115175A
This screen fits in the sump around the pick up tube.
Application:Part #: 111115475A
Oil Filler Seal, 25-36 HP
Application:Part #: 1115467
This is a breather box that will give excess "blow by" a place to go.
Application:Part #: 113115175
This screen fits in the sump around the pick up tube.
Application:Part #: JC22970
Jaycee Billet Full Flow Pump Cover w/ -8 O-ring Fitting, Red
Application:Part #: 1115107AFF
26mm Oil pump for dual relief case with a flat cam. For full flowed motors only.
Application:Part #: 1117104
When plumbing the oil filter, oil cooler and/or case, these are the fittings you will need.
Application:
The oil pump is the heart of the engine, so it is very important to choose the right one.
