Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
These fittings are used for the stainless steel hose.
These fittings are used for the stainless steel hose. Keep in mind there will be two fittings per connection. On the pipe thread end use teflon tape and don't "muscle" them. Turn them as tight as you can by hand, then one more full turn with a wrench.
Bug (Type 1): All
Bus (Type 2): All
Type 3: All
Ghia: All
Thing: All
Race/Off-Road: All
No customer reviews for the moment.
Part #: JC21040
Jaycee Mag-Plate, 6 Bolt, Silver
Application:Part #: 1117024
Mesa coolers are the state of the art oil coolers.
Application:Part #: 113115611
No, this isn't that distant cousin.
Application:Part #: 1115457BK
The smooth flow design has a nice look and comes with a knurled cross-groove or smooth billet grooved cap for a good grip when it is wet or oily. Black
Application:Part #: 1117698
When mounting the oil cooler above the transmission on a Bug, Type 3, Ghia, Thing, or Off Road car you can use these rubber mounted studs.
Application:Part #: 1115106A
This is a great way to increase the oil capacity of your engine.
Application:Part #: 068115561B
Oil Filter use in place of HP1
Application:Part #: 111198031
36 HP Oil Change Kit
Application:Part #: 1117108
When plumbing the oil filter, oil cooler and/or case, these are the fittings you will need.
Application:Part #: 1115183BL
This plate is made out of a solid piece of aluminum. Blue
Application:Part #: 1117103
When plumbing the oil filter, oil cooler and/or case, these are the fittings you will need.
Application:Part #: 1117109
This block off plate is made to loop the oil back into the case in place of the stock oil cooler.
Application:Part #: 1117101
When plumbing the oil filter, oil cooler and/or case, these are the fittings you will need.
Application:Part #: 1115467
This is a breather box that will give excess "blow by" a place to go.
Application:Part #: 1115457
The smooth flow design has a nice look and comes with a knurled cross-groove or smooth billet grooved cap for a good grip when it is wet or oily.
Application:Part #: JC22230
Jaycee Billet Oil Cap with Breater -8 AN Fitting, Blue
Application:
These fittings are used for the stainless steel hose.
