Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
When plumbing the oil filter, oil cooler and/or case, these are the fittings you will need.
When plumbing the oil filter, oil cooler and/or case, these are the fittings you will need. Always use teflon tape on your fittings. Whatever you do, don't "muscle" them in, especially the 90 degree fitting on the case. We like to use quick fittings by the oil pump and case. If you use quick fittings, you won't have to cut hoses when you pull the engine.
Bug (Type 1): All
Bus (Type 2): All
Type 3: All
Ghia: All
Thing: All
Race/Off-Road: All
No customer reviews for the moment.
Part #: 1115107FF
30mm Oil pump for Dual Relief & Flat cam Full Flowed Engines
Application:Part #: 1115107AFF
26mm Oil pump for dual relief case with a flat cam. For full flowed motors only.
Application:Part #: 068115561B
Oil Filter use in place of HP1
Application:Part #: 113115193
This is the bolt that goes in the plate on the bottom of the motor.
Application:Part #: 111117021ERB
This stock oil cooler cools the hot oil coming from the engine.
Application:Part #: 1117104ALM
These fittings are used for the stainless steel hose.
Application:Part #: 1117109B
Billett Oil Cooler Block Off
Application:Part #: JC22660
Jaycee Street Oil Filter Bracket, Black
Application:Part #: 1117098
When plumbing the oil filter, oil cooler and/or case, these are the fittings you will need.
Application:Part #: 1117110
This adapter replaces the stock oil cooler with two hoses to reroute the oil to an external oil cooler.
Application:Part #: 1117024
Mesa coolers are the state of the art oil coolers.
Application:Part #: 311115107HD
The oil pump is the heart of the engine, so it is very important to choose the right one.
Application:Part #: 1115351
This is the last oil filter you will ever buy.
Application:Part #: 111115475A
Oil Filler Seal, 25-36 HP
Application:Part #: N122412
This is a general rule for washer use, wafer washers are used against aluminum and lock washers are used against steel..
Application:Part #: 113117303
This stock oil cooler cools the hot oil coming from the engine.
Application:
When plumbing the oil filter, oil cooler and/or case, these are the fittings you will need.
