Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
The oil pump is the heart of the engine, so it is very important to choose the right one.
The oil pump is the heart of the engine, so it is very important to choose the right one. When ordering a pump you will need to know if your case is a single or dual relief, if you have a dished or a flat cam and if you want a standard or heavy duty pump. Remember that you can only pump so much oil through a certain size hole, so be careful in ordering a heavy duty pump. We feel that any pump with gears larger than 30mm is a waste of money. Note: When replacing a pump make sure you use four new sealing nuts.
Bug (Type 1): 68-69
Bus (Type 2): 68-69
Type 3: 68-69
Ghia: 68-69
Race/Off-Road: 68-69
No customer reviews for the moment.
Part #: 1115453
This stock oil filler and cap has been chromed.
Application:Part #: 1117005
This adapter is used to mount an oil filter either by itself or in line with an oil cooler.
Application:Part #: 1117698
When mounting the oil cooler above the transmission on a Bug, Type 3, Ghia, Thing, or Off Road car you can use these rubber mounted studs.
Application:Part #: 1117104
When plumbing the oil filter, oil cooler and/or case, these are the fittings you will need.
Application:Part #: 1117012
These bolt on mounts allow you to bolt the filter adapter under the driver's side fender or hang it off the exhaust flange..
Application:Part #: 1115611
Chrome dipsticks come in different lengths and styles..
Application:Part #: JC21030
Jaycee Mag-Plate, 6 Bolt, Blue
Application:Part #: 1115183BK
This plate is made out of a solid piece of aluminum. Black
Application:Part #: 1115450PL
The oil filler extension screws into the generator stand and comes with a fitting to vent the crankcase.
Application:Part #: 111115175A
This screen fits in the sump around the pick up tube.
Application:Part #: 1117007SS
This is the high-temp/pressure hose wrapped with braided stainless steel.
Application:Part #: 113115175
This screen fits in the sump around the pick up tube.
Application:Part #: 1115422
These stronger springs were designed to boost the oil pressure in your motor.
Application:Part #: 1115183BL
This plate is made out of a solid piece of aluminum. Blue
Application:Part #: 111115107B
The oil pump is the heart of the engine, so it is very important to choose the right one.
Application:Part #: 1115420
This is one way to adjust your oil pressure.
Application:
The oil pump is the heart of the engine, so it is very important to choose the right one.
