Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
This plate will block off the type 3 oil filler hole in a universal case.
This plate will block off the type 3 oil filler hole in a universal case.
Bug (Type 1): 1500-1600
Bus (Type 2): 1500-1600
Ghia: 1500-1600
Thing: 1500-1600
Race/Off-Road: 1500-1600
No customer reviews for the moment.
Part #: 1115181
A stock sump plate that has been chromed..
Application:Part #: 111115495
This is more of a bolt than a nut.
Application:Part #: 1115457BL
The smooth flow design has a nice look and comes with a knurled cross-groove or smooth billet grooved cap for a good grip when it is wet or oily. Blue
Application:Part #: 111115475A
Oil Filler Seal, 25-36 HP
Application:Part #: 1115457BK
The smooth flow design has a nice look and comes with a knurled cross-groove or smooth billet grooved cap for a good grip when it is wet or oily. Black
Application:Part #: N115244
This is a general rule for washer use, wafer washers are used against aluminum and lock washers are used against steel..
Application:Part #: 1115457RD
The smooth flow design has a nice look and comes with a knurled cross-groove or smooth billet grooved cap for a good grip when it is wet or oily. Red
Application:Part #: N121051
This is a general rule for washer use, wafer washers are used against aluminum and lock washers are used against steel..
Application:Part #: 040101149
Oil pick up Pipe
Application:Part #: 1115450PL
The oil filler extension screws into the generator stand and comes with a fitting to vent the crankcase.
Application:Part #: 1115106
A great way to increase the oil capacity of your engine is to bolt on a deep sump.
Application:Part #: JC22660
Jaycee Street Oil Filter Bracket, Black
Application:Part #: N138171
Oil pressure relief gasket
Application:Part #: 1117099
When plumbing the oil filter, oil cooler and/or case, these are the fittings you will need.
Application:Part #: 111198029
This stock oil cooler cools the hot oil coming from the engine.
Application:Part #: 1117102
When plumbing the oil filter, oil cooler and/or case, these are the fittings you will need.
Application:
This plate will block off the type 3 oil filler hole in a universal case.
