Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
This kit contains all of the gaskets needed to rebuild a transmission.
This kit contains all of the gaskets needed to rebuild a transmission. If you don't have the correct transmission jigs, don't try to rebuild the transmission yourself.
Bug (Type 1): 66-79
Bus (Type 2): 66-67
Type 3: 66-74
Ghia: 66-74
Thing: 73-74
Race/Off-Road: 66-
No customer reviews for the moment.
Part #: 111398003
Transmission gasket set.
Application:Bug (Type 1); -60
Bus (Type 2); -59
Ghia; -60
Part #: 111301289
Nose Cone Boot
Application:Part #: 111301257
Transmission Horn Bolt
Application:Part #: 111301255A
Transmission Cradle Mount Bracket
Application:Part #: 1301050
These straps are a good idea if you have a car with a big engine.The rear strap keeps the bell housing from twisting and the front strap keeps the nose of the transmission from breaking the front mount.We highly recomend that you use these in conjunction with the urethane transmission mounts.
Application:Part #: 113713145A
The points that are in the shifter that disengage the transmission..
Application:Part #: 211301265AFA
Transmission mount, front, mid
Application:Part #: 113311123A
This is the main culprit of a noisy transmission.
Application:Part #: 113301229A
This is the front of the transmission that houses the shift lever.
Application:Part #: 1301265
These mounts made of urethane never wear-out.
Application:Part #: 001301209C
Nose Cone Seal Holder
Application:Part #: 1311123
This steel thrust plate stops movement of the main shaft bearing and aids in the keepin the alignment of the gears on the main and pinion shafts.
Application:Part #: 113517289A
These are the seals that go around the final drives on an IRS transmission.
Application:Part #: 311301265A
These rubber mounts hold the transmission in place.
Application:Part #: 113301264
These rubber mounts hold the transmission in place.
Application:
This kit contains all of the gaskets needed to rebuild a transmission.
