Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
This steel thrust plate stops movement of the main shaft bearing and aids in the keepin the alignment of the gears on the main and pinion shafts.
This steel thrust plate stops movement of the main shaft bearing and aids in the keepin the alignment of the gears on the main and pinion shafts. On buses 1968-1979 we highly recomend this plate. The nose cone of your transaxle will have to be removed to install this plate.
Bug (Type 1): 61-67
Bus (Type 2): 61-67
Type 3: 61-77
Ghia: 61-74
Thing: 73-74
No customer reviews for the moment.
Part #: 113301229A
This is the front of the transmission that houses the shift lever.
Application:Part #: 211301215
This is the front of the transmission that houses the shift lever.
Application:Part #: 1301263
These mounts made of urethane never wear-out.
Application:Part #: 1517122
These diffs add two more spider gears to your differential, plus the housing is way stronger then stock.
Application:Part #: 111301207
Nose Cone Bushing, Front or Rear, Early
Application:Part #: 211301205H
This is the front of the transmission that houses the shift lever.
Application:Part #: 113301263
These rubber mounts hold the transmission in place.
Application:Part #: 6501141
These retainers help stiffen the plates that bolts the tubes to the trans.
Application:Part #: 113301264
These rubber mounts hold the transmission in place.
Application:Part #: 113311113A
This seal goes around the mainshaft.
Application:Part #: 111301155
This is the bushing between the bellhousing of the transmission and the starter.
Application:Part #: 1301048I
Padded Trans Support Front Kit
Application:Part #: 113301189F
These are the seals that go around the final drives on an IRS transmission.
Application:Part #: 1301266
Trans Axle Adapter Kit
Application:Part #: 001301083
This seal keeps the fluid in the converter.
Application:Part #: 111398003
Transmission gasket set.
Application:Bug (Type 1); -60
Bus (Type 2); -59
Ghia; -60
This steel thrust plate stops movement of the main shaft bearing and aids in the keepin the alignment of the gears on the main and pinion shafts.
