Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
This gasket goes between the reduction box halves.
This gasket goes between the reduction box halves. It should be replaced if you are going to split the halves. We use gasketcinch sealer on the gasket upon reassembly.
No customer reviews for the moment.
Part #: 211501293A
This nut goes on the inner side of the lower axle shaft of your large nut (46mm) recution boxes.
Application:Part #: 6501141
These retainers help stiffen the plates that bolts the tubes to the trans.
Application:Part #: 1517120
These diffs add two more spider gears to your differential, plus the housing is way stronger then stock.
Application:Part #: 003301089D
Front Torque Converter Seal for Automatic Transmission
Application:Part #: 211598600
Lock Plate Kit for Reduction Boxes
Application:Part #: 111301155
This is the bushing between the bellhousing of the transmission and the starter.
Application:Part #: 113398209
Bushings and a seal for the nose cone.
Application:Part #: 111301257
Transmission Horn Bolt
Application:Part #: 001301209C
Nose Cone Seal Holder
Application:Part #: 2301150
This is a bolt on kit that reduces torsional stress felt at the front of the nose cone mount and rotational stress on the bell housing mounts.
Application:Bus (Type 2); 56-67
Part #: 211301215
This is the front of the transmission that houses the shift lever.
Application:Part #: 251711181
Shift Rod Support Pin for manual Transmissions only
Application:Part #: 111501131
This kit contains all of the gaskets needed to rebuild a transmission.
Application:Part #: 113301185A
This kit contains all of the gaskets needed to rebuild a transmission.
Application:Part #: 2301149
Replacement Rubber mounts for Bus mid mount
Application:Bus (Type 2); 56-67
Part #: 211711169
Shift Rod Coupler, connects front to rear shift rods
Application:
This gasket goes between the reduction box halves.