Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
Rear glass for trucks
Bus (Type 2); 68-79 single or double cab
This is the glass for a rear window on a single or double cab. You might want to get a new seal for this as well. See Front Window for instructions on how to put this in.
No customer reviews for the moment.
Part #: 113837639
These locks keep the vent wing closed, therefore a must, but they're a pain to replace.
Application:Part #: 111837595A
This plastic "donut" goes under the window crank or door handle to prevent the door panel from getting ripped.
Application:Part #: 211837235ABK
This plastic "donut" goes under the window crank or door handle to prevent the door panel from getting ripped.
Application:Part #: 321837581ABK
On Bugs up to 1967 and on Buses up to 1963 you will need to push back the small plastic bezel.
Application:Part #: 211837235AIV
This plastic "donut" goes under the window crank or door handle to prevent the door panel from getting ripped.
Application:Part #: 211837822A
This latch goes through the glass on the front door windows.
Application:Part #: 211837235AGY
This plastic "donut" goes under the window crank or door handle to prevent the door panel from getting ripped.
Application:Part #: 211837821A
This latch goes through the glass on the front door windows.
Application:Part #: 211837235GY
This plastic "donut" goes under the window crank or door handle to prevent the door panel from getting ripped.
Application:Part #: 221847081D
These are the latches that hold the popout frame out.
Application:Part #: 1837581B
These window cranks and door handles are a nice way to give the interior of your car a sporty look.
Application:Part #: 221847213R
This triangular spacer plate goes between your welded plate and the screws.
Application:Part #: 111837581J
On Bugs up to 1967 and on Buses up to 1963 you will need to push back the small plastic bezel.
Application:Part #: 211837235IV
This plastic "donut" goes under the window crank or door handle to prevent the door panel from getting ripped.
Application:Part #: 311837658A
These locks keep the vent wing closed, therefore a must, but they're a pain to replace.
Application:Part #: N142643
Inner Door Handle to Window Regulator Screw
Application:
Rear glass for trucks
