Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
These shims are used under the rockers to set the geometry.
These shims are used under the rockers to set the geometry. This is a very important step, so if you need help, call and we will be happy to explain it to you. Sold in sets of four.
Bug (Type 1): 40hp-1600
Bus (Type 2): 40hp-1600
Type 3: 40hp-1600
Ghia: 40hp-1600
Thing: 40hp-1600
Race/Off-Road: 40hp-1600
No customer reviews for the moment.
Part #: 1109341OR
Replacement O-Ring Set 16 pieces
Application:Part #: 1109341EA
Push Rod Tubes, Adjustable Big-Mouth, Each
Application:Part #: 111109611A
Exhaust Valve 36 HP
Application:Part #: 111198541GR
The cam rides in these bearings.
Application:Part #: 113109301D
These rods link the cam to the valves. These are very costly so please call for good used ones.
Application:Part #: 1109009
We have had good luck with this cam and prefer it over new stock cams and is a great cam when you want to stay with the stock carburetor or Kadrons.
Application:Part #: 113109623C
These springs return the valves back to their seats.
Application:Part #: 1109310
These lifters are made by Engle and have a small hole in the end of them that allows oil to be pumped onto the cam lobe and lifter face.
Application:Part #: 1109335
These stock-style tubes are made of stainless steel.
Application:Part #: 043109611A
The two outside valves in the head are the exhaust valves, they let the burned fuel out of the head.
Application:Part #: 1109302
These push rods are made out of chromoly steel and do not expand at the same rate as aluminum.
Application:Part #: 1109006
These gears give just a hair more horsepower.
Application:Part #: 1109338
These push rod tubes are spring loaded and are great for replacing bent tubes without having to pull the head(s) off.
Application:Part #: 1109612
Stainless steel valves are used in the big valve heads.
Application:Part #: N111521
This screw rides against your valve, opening and closing it.
Application:Part #: 111109325
Push Rod Guide, 25-36 HP, Each
Application:
These shims are used under the rockers to set the geometry.
