Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
These push rod tubes are spring loaded and are great for replacing bent tubes without having to pull the head(s) off.
These push rod tubes are spring loaded and are great for replacing bent tubes without having to pull the head(s) off. These are better than the nylon push rod tubes, but we find they still leak a little. The stock push rod tubes are the best.
Bug (Type 1): 40hp-1600
Bus (Type 2): 40hp-1600
Type 3: 40hp-1600
Ghia: 40hp-1600
Thing: 40hp-1600
Race/Off-Road: 40hp-1600
No customer reviews for the moment.
Part #: 311109601
The two inside valves in the head are the intake valves, which let the gas into the combustion chamber.
Application:Part #: 1109006
These gears give just a hair more horsepower.
Application:Part #: 1109001
Engle cams are one of the most popular performance camshafts made for the air-cooled Volkswagen.
Application:Part #: 1109398
These rocker studs are much stronger than the stock studs and are .100" longer to allow more flexibility when setting your rocker arm geometry..
Application:Part #: JC91040
Jaycee Leak proof Pushrod Tubes, Silver
Application:Part #: 113109345A
These are the seals that go around the push rod tubes.
Application:Part #: 1109642
If you are going to run dual springs we suggest you use these valve spring retainers as well.
Application:Part #: 1109623
These are single heavy duty valve springs which are used on engines with Engle 110 or larger cams.
Application:Part #: 1109310
These lifters are made by Engle and have a small hole in the end of them that allows oil to be pumped onto the cam lobe and lifter face.
Application:Part #: 1109399
1.25 Ratio Rockers ONLY
Application:Part #: 1109336
These push rod tubes are spring loaded and are great for replacing bent tubes without having to pull the head(s) off.
Application:Part #: 1109415
These shims are used under the rockers to set the geometry.
Application:Part #: 111198541GR
The cam rides in these bearings.
Application:Part #: 111198541HD
The cam rides in these bearings.
Application:Part #: 113109301D
These rods link the cam to the valves. These are very costly so please call for good used ones.
Application:
These push rod tubes are spring loaded and are great for replacing bent tubes without having to pull the head(s) off.
