Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
This washer is larger in diameter than stock so it gives you more surface coverage over the dowel pins.
This washer is larger in diameter than stock so it gives you more surface coverage over the dowel pins. You should use this washer anytime your crank has been 8 doweled. It is very important that you torque the bolt to 250 ft.lb.
Bug (Type 1): 40hp-1600
Bus (Type 2): 40hp-1600
Type 3: 40hp-1600
Ghia: 40hp-1600
Thing: 40hp-1600
Race/Off-Road: 40hp-1600
No customer reviews for the moment.
Part #: 111105433
Wrist Pin Bushing.
Application:Bug (Type 1); 40hp
Bus (Type 2); 40hp
KG; 40hp
Part #: JC86050
Jaycee Billet 7" Crank Pulley for Street Cars, Black
Application:Part #: 111105271CO
Core
Application:Part #: 311105273ACO
These flywheels have been reconditioned and are sold on an exchange basis.
Application:Part #: 111105707A
Rod Bearings .10
Application:Part #: 113105281A
These shims set the endplay of the crankshaft.
Application:Part #: 111198455
Main Bearings, 25-36 HP
Application:Part #: 1105219
This spacer goes between the steel cam gear and the brass distributor gear on the crank.
Application:Part #: JC86040
Jaycee Billet 7" Crank Pulley for Street Cars, Red
Application:Part #: 1903108PL
EMPI Serpentine Belt System
Application:Part #: 1105273CH
Lightened 12 lb.
Application:Part #: 111105213
This key goes into the crank to align the steel cam gear with the brass distributor drive gear.
Application:Part #: 1105273BR
Lightened 12 lb.
Application:Part #: 111105271RC
These flywheels have been reconditioned and are sold on an exchange basis.
Application:Part #: 113105251G
This pulley on the end of the crank turns the fan belt.
Application:Part #: 1105253RD
This is a crank pulley for an upright motor.
Application:
This washer is larger in diameter than stock so it gives you more surface coverage over the dowel pins.
