Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
This is a billet, zinc plated crankshaft pulley bolt that has a 3/8" drive hole broached into the center.
This is a billet, zinc plated crankshaft pulley bolt that has a 3/8" drive hole broached into the center. This is great for working on your motor, just snap in your 3/8" ratchet and you can easily turn your motor over by hand.
Bug (Type 1): 36hp-1600
Bus (Type 2): 36hp-1600
Ghia: 36hp-1600
Thing: 36hp-1600
Race/Off-Road: 36hp-1600
No customer reviews for the moment.
Part #: 111105719A
Rod Bearings .30
Application:Part #: 1105178
This crankshaft is made of E4340 chromoly forging, one of the strongest metals known to man.
Application:Part #: 111105433
Wrist Pin Bushing.
Application:Bug (Type 1); 40hp
Bus (Type 2); 40hp
KG; 40hp
Part #: 111105233
This gear matches up with the brass gear that is on the crank.
Application:Part #: 111105313A
It's really a bolt, but that's what everybody calls it.
Application:Part #: 113105401ARC
Most people don't realize that these are one of the most important parts in the motor.
Application:Part #: 1903108PL
EMPI Serpentine Belt System
Application:Part #: 111903221S
Replacement Bearings for Serpentine System
Application:Part #: 1105254BK
This is a crank pulley for an upright motor.
Application:Part #: 1105258
This is a stock, zinc-plated crankshaft pulley bolt that has a 3/8" drive hole broached into the center.
Application:Part #: 1105401
I-Beam Rod, 5.394" VW Journal (Empi 3/8" Rod Bolts) Set of 4
Application:Part #: 1105278
Here are some flywheel pins that give you more contact surface on the flywheel.
Application:Part #: 111105213
This key goes into the crank to align the steel cam gear with the brass distributor drive gear.
Application:Part #: 1105251CH
This is a stock pulley that has been chromed.
Application:Part #: 1105255BK
This is a very nice pulley; the numbers are etched in and do not wear off.
Application:Part #: JC86060
Jaycee Billet 7" Crank Pulley for Street Cars, Blue
Application:
This is a billet, zinc plated crankshaft pulley bolt that has a 3/8" drive hole broached into the center.
