Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
This is a stock, zinc-plated crankshaft pulley bolt that has a 3/8" drive hole broached into the center.
This is a stock, zinc-plated crankshaft pulley bolt that has a 3/8" drive hole broached into the center. This is great for working on your motor, just snap in your 3/8" ratchet and you can easily turn your motor over by hand.
Bug (Type 1): 40hp-1600
Bus (Type 2): 40hp-1600
Ghia: 40hp-1600
Thing: 40hp-1600
Race/Off-Road: 40hp-1600
No customer reviews for the moment.
Part #: 111105233
This gear matches up with the brass gear that is on the crank.
Application:Part #: JC86060
Jaycee Billet 7" Crank Pulley for Street Cars, Blue
Application:Part #: JC86050
Jaycee Billet 7" Crank Pulley for Street Cars, Black
Application:Part #: 113105281A
These shims set the endplay of the crankshaft.
Application:Part #: JC86070
Jaycee Billet 7" Crank Pulley for Street Cars, Silver
Application:Part #: JC86040
Jaycee Billet 7" Crank Pulley for Street Cars, Red
Application:Part #: 1105277
Here are some flywheel pins that give you more contact surface on the flywheel.
Application:Part #: 111105227
Retaining Clip, 1200-1600cc
Application:Part #: 111105287
Flywheel Shim 25-36HP, .34mm (0.0135")
Application:Part #: 113105281A
These shims set the endplay of the crankshaft.
Application:Part #: 1105219
This spacer goes between the steel cam gear and the brass distributor gear on the crank.
Application:Part #: 113105277
These pins hold the flywheel in place on the crankshaft.
Application:Part #: 113105281A
These shims set the endplay of the crankshaft.
Application:Part #: 111105707A
Rod Bearings .10
Application:Part #: 111105297
It's really a bolt, but that's what everybody calls it.
Application:Part #: 1105271
If your are going to run a 69mm or a 78 mm counterweighted crank, then you will want to have your flywheel 8 doweled or get a flywheel has been 8 doweled.
Application:
This is a stock, zinc-plated crankshaft pulley bolt that has a 3/8" drive hole broached into the center.
