Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:These are the bearings and brushes for your generator.
These are the bearings and brushes for your generator. Replacing bearings will require you to take the generator apart, so pay close attention to where all the parts go. The brushes can be replaced with the generator still on the Car. The bottom brush is tricky, so lay a rag under the opening in case you drop the screw.
Bug (Type 1): 67-73
Bus (Type 2): 67-71
Type 3: 67-73
Ghia: 67-74
Thing: 73
Race/Off-Road: 67-73
No customer reviews for the moment.
Part #: GR11X
Generators supply the battery with voltage.
Application:Part #: N127051
This is the pulley on the generator that holds the belt.
Application:Part #: 1301103
This bushing is made to mate mismatched bellhousing and starter combinations.
Application:Part #: SR15HT
This is what starts the car.
Application:Part #: 30019
This little box tells the generator what to do.
Application:Part #: GR15NC
Generators supply the battery with voltage.
Application:Part #: 1903183
This aftermarket chrome cap nut and spacer hold the alternator/generator pulley on.
Application:Part #: 043903109GR
This is the pulley on the generator that holds the belt.
Application:Part #: 1903109BOPO
Billet Pulley Outer Half Polished
Application:Part #: 111119141A
Cooling Fan Nut
Application:Part #: 111903515A
These are the bearings and brushes for your generator.
Application:Part #: GR15XCO
Core Charge Generators supply the battery with voltage. Rebuilt
Application:Part #: GR11XCO
Generators supply the battery with voltage.
Application:Part #: 113903141B
The generator strap goes around the generator and holds the generator to the stand..
Application:Part #: 111903137E
This is the belt that turns the generator.
Application:Part #: 111119270B
This is a hub that is keyed onto the generator or alternator to mount the fan.
Application: