Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:This unit supplies the battery with voltage.
This unit supplies the battery with voltage. To test your alternator, see Voltage Regulators. This is a new unit
Bug (Type 1): 67-
Bus (Type 2): 67-71
Ghia: 67-
Thing: 73-74
Race/Off-Road: 67-
No customer reviews for the moment.
Part #: 111119141A
Cooling Fan Nut
Application:Part #: GR11XCO
Generators supply the battery with voltage.
Application:Part #: SR17X
This is what starts the car.
Application:Part #: 042903109AGR
VW Generator Pulley, 6V
Application:Part #: JC86020
Jaycee Billet Alternator Pulley, Red
Application:Part #: 1903183
This aftermarket chrome cap nut and spacer hold the alternator/generator pulley on.
Application:Part #: 042903109ABR
This is the pulley on the generator that holds the belt.
Application:Part #: 1903109BLT
Black Billet Alternator/Generator Pulley Kit
Application:Part #: 111903131A
Probably the most common cause of generator pulleys coming apart is the shortage of shims.
Application:Part #: 1903141
This chrome strap holds the alternator or generator to the stand.
Application:Part #: 1903109CH
This is a stock generator pulley that has been chromed.
Application:Part #: 211903183
This is the bell shaped spacer that hold the outer half of the generator pulley on.
Application:Part #: 1903531
On all upright motor, this plastic cover goes over the top opening of the generator to keep dirt out.
Application:Part #: 111119270B
This is a hub that is keyed onto the generator or alternator to mount the fan.
Application:Part #: 111903137B
This is the belt that turns the generator.
Application:Part #: 1119031BHD
Motors with high horsepower and motors that rev fast run the risk of exploding a stock fan.
Application: