Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
This is the belt that turns the generator.
This is the belt that turns the generator. We found German belts are the only belts with the correct width. Wider belts tend to ruin the generator pulley. Note: See GENERATOR PULLEY for instructions. Make sure you always carry a spare belt and the tools to change it.
Bug (Type 1): All
Bus (Type 2): All
Ghia: All
Thing: All
Race/Off-Road: All
No customer reviews for the moment.
Part #: 111119270B
This is a hub that is keyed onto the generator or alternator to mount the fan.
Application:Part #: AL8275
This unit supplies the battery with voltage.
Application:Part #: SR15NC
This is what starts the car.
Application:Part #: 111903137B
This is the belt that turns the generator.
Application:Part #: 1903109BLT
Black Billet Alternator/Generator Pulley Kit
Application:Part #: N127051
This is the pulley on the generator that holds the belt.
Application:Part #: SR11XCO
This is what starts the car.
Application:Part #: 111119131
Fan Hub Washer
Application:Part #: GR15NCH
Generators supply the battery with voltage. CHINA
Application:Part #: 1903109BOBK
Billet Pulley Outer Half Black
Application:Part #: 113971901A
This boot goes over the wire and the terminal of the generator or alternator.
Application:Part #: 1903532
This is just a cover that fits around a 30amp generator to give it that chrome look.
Application:Part #: 1903141
This chrome strap holds the alternator or generator to the stand.
Application:Part #: 1301104
This bushing is made to mate mismatched bellhousing and starter combinations.
Application:Part #: 1903183
This aftermarket chrome cap nut and spacer hold the alternator/generator pulley on.
Application:Part #: SRHT6V
A 6volt gear that fits the high torque starter.
Application:
This is the belt that turns the generator.
