Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:If you are prone to stick your finger where they don't belong or have kids that do, it's a good idea to put a guard around the belt..
If you are prone to stick your finger where they don't belong or have kids that do, it's a good idea to put a guard around the belt.
Off-Road: 1200-1600
No customer reviews for the moment.
Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 1119352BK
These three pieces of tin go from the heater boxes to the case.
Application:Part #: 6105251
If you are prone to stick your finger where they don't belong or have kids that do, it's a good idea to put a guard around the belt..
Application:Part #: 1119302BK
These cylinder head tins sit under the fan shroud.
Application:Part #: N115244
This is a general rule for washer use, wafer washers are used against aluminum and lock washers are used against steel..
Application:Part #: 6119025CH
This screen attaches to the fan shroud keeping the big stuff out.
Application:Part #: 6109335
These shields help protect your pushrod tubes.
Application:Part #: 1119302CH
These cylinder head tins sit under the fan shroud.
Application:Part #: 1119317CH
Cool tins are must for those of you with high performance exhaust systems without heater boxes.
Application:Part #: 113119031B
This is the fan that fits inside of the fan shroud on Bugs 1971-1979 and a 1971 Bus.
Application:Part #: 6119303CH
These cylinder head tins sit under the fan shroud.
Application:Part #: 1119023
This spacer kit uses 1 1/4" thick aluminum spacers to close the gap between the fan shroud and the cylinder tins where the sheet metal screw attaches.
Application:Part #: 1903032
These are the three pieces of tin that go on the back of the generator or alternator.
Application:Part #: 1119303BK
These cylinder head tins sit under the fan shroud.
Application:Part #: 1119352CH
These three pieces of tin go from the heater boxes to the case.
Application:Part #: 043119350B
Heater Channel Tin Upper Right
Application: