Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
This is the exhaust silencer.
This is the exhaust silencer. If you want a stock muffler, we prefer the German made ones. They fit better and last longer. Brazilian mufflers can't compare in quality, but they're available and cheaper. Note: Once you have installed your muffler, drive the car for a day and retighten the nuts, bolts and clamps, as they will loosen up.
Bug (Type 1): Cal.74
Ghia: Cal. 74
Thing: Cal.74
No customer reviews for the moment.
Part #: 113251163C
Tail pipes route the exhaust out of the back of the stock muffler..
Application:Part #: 113251263B
This kit includes the gaskets and hardware to install a stock muffler or tail pipes..
Application:Part #: 0280160200
Fuel Pressure Regulator for later air cooled Bugs and Buses
Application:Part #: 311405645GR
These bearings go in the drum or rotor hub to allow them to spin. German
Application:Part #: 1415609SLV
Banjo Style Vintage Steering Wheel Kit, Silver
Application:Part #: VDO360023
These are the most common sending units.
Application:Part #: 021109339
Push Rod Tube Retaining Clip
Application:Part #: 6251002
Systems are designed for max horsepower and to handle the punishment of off-road competition.
Application:Part #: N142601
Screw for Assist Strap
Application:Part #: 6801119
90 Degree Gusset, .115" Thick, Set of 4
Application:Part #: 111863113
These are the interior panels.
Application:Part #: 025198012A
Cylinder Head Gasket Set (1 side)
Application:Part #: 251807124A
these plastic caps mount on the ends of the later year bumpers..
Application:Part #: 1129028
Replacement Tubes & Brackets only for Empi EPC 32/36F carbs
Application:Part #: 311501615E
The rear wheel attaches to the rear brake drum.
Application:Part #: 2129510
We've found that dual carbs work better than any single carburator set up.
Application:Part #: 113943901B
Front licence Plate clamps
Application:Part #: 1953161
This bumper is perfect for 1968-73 cars when the turn signals have been shaved off the front fenders.
Application:
This is the exhaust silencer.