Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
This is a replacement paper element for the stock air cleaner..
This is a replacement paper element for the stock air cleaner.
Bus (Type 2): 75-85
No customer reviews for the moment.
Part #: 113127303
The fuel pump sits on this little stand and it's also the guide for the push rod.
Application:Part #: 1129601HD
This is a replacement air cleaner for the Weber IDF.
Application:Part #: 1127100
Hose Clamp for 5mm hose
Application:Part #: 113129709D
Dual Port Manifold End Casting - Left
Application:Part #: 311129707
These are the gaskets used between the intake manifold and the cylinder head.
Application:Part #: 113127511A
Fuel Line, Metal, 6mm Pump to Carburetor
Application:Part #: 1129729RD
These boots are better than stock.
Application:Part #: 211129627
Air Cleaner Hose, Rubber, joins Remote Air Cleaner to Carburetor
Application:Part #: 1129616
This air cleaner is a sealed unit; the top and bottom do not come off, but they're washable.
Application:Part #: 111127521A
This metal line goes from the pump around the fan shroud to the flex line that comes from the gas tank.
Application:Part #: 039133241
These two boots connect the intake manifold with the end casting,
Application:Part #: 021127303A
The fuel pump sits on this little stand and it's also the guide for the push rod.
Application:Part #: 1129708
This pair of aluminum end castings are for use with a center section manifold.
Application:Part #: 111127141
Fuel Pump Diaphragm 25-36 HP
Application:Part #: 113129701K
Single Port, Intake Manifold, 1500-1600cc, 30mm Base
Application:Part #: 1129611
This is a good, cheap dual carburetor kit for a 1600cc motor.
Application:
This is a replacement paper element for the stock air cleaner..