Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
The rear wheel attaches to the rear brake drum.
The rear wheel attaches to the rear brake drum. Make sure you torque the axle nut to 250 ft. lb., we don't want any wheels falling off. We suggest you drive the Bug for a day and tighten the nut again. For some reason the nut seems to loosen up the first time. Always use a cotter pin to lock the nut. If the hole doesn't line up, tighten it a little bit more until it does. Never, ever back the nut off to line up the hole.
Bus (Type 2): 64-67
No customer reviews for the moment.
Part #: 113609205A
These are the screws and adjusting stars that freeze up and keep you from adjusting your brakes.
Application:Part #: 211609209A
These are the screws and adjusting stars that freeze up and keep you from adjusting your brakes.
Application:Part #: 211611477A
This valve in the wheel cylinder allows you to bleed the brakes.
Application:Part #: 211611483
This valve in the wheel cylinder allows you to bleed the brakes.
Application:Part #: 211698291
This kit is for rebuilding the wheel cylinder.
Application:Part #: 211611047C
This hydraulic slave cylinder is found in the rear brake backing plate.
Application:Part #: 211698003A
This kit has all the springs, pins and keepers for drum brakes.
Application:Part #: 211609537E
These shoes or linings are in the rear drums and are new, so no exchange.
Application:Part #: 311501615F
The rear wheel attaches to the rear brake drum.
Application:Part #: 113105281A
These shims set the endplay of the crankshaft.
Application:Part #: 111903137S
Replacement Belt for Serpentine System
Application:Part #: 1707134F
If you have a 1968 through 1973 bug and want the eariler style bumpers on it, these are the brackets that will get you there..
Application:Part #: 113847129CR
Chrome Pop Out Window Hinge Cover
Application:Part #: 6707301CH
These bumpers are made for Baja Bugs.
Application:Part #: 113819661G
These are the knobs for the wiper and light switches on the dash.
Application:Part #: 251807035R
Bumper Strip Retaining Clips (Set of 10)
Application:Part #: 113943901B
Front licence Plate clamps
Application:Part #: 6721355RD
Clutch Slave cylinder billet
Application:Part #: 113251053AJ
This is the exhaust silencer.
Application:Part #: 068251053D
This is the exhaust silencer.
Application:Part #: 113953051K
Turn Signal Bulb Holder, Each
Application:Part #: 111827517A
This is the seal that goes under the deck lid handle..
Application:Part #: 211813355A
Rear Corner to Beltline, Left
Application:
The rear wheel attaches to the rear brake drum.
