Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:The rear wheel attaches to the rear brake drum.
The rear wheel attaches to the rear brake drum. Make sure you torque the axle nut to 250 ft. lb., we don't want any wheels falling off. We suggest you drive the Bug for a day and tighten the nut again. For some reason the nut seems to loosen up the first time. Always use a cotter pin to lock the nut. If the hole doesn't line up, tighten it a little bit more until it does. Never, ever back the nut off to line up the hole.
Bus (Type 2): 71-79
No customer reviews for the moment.
Part #: 113609205A
These are the screws and adjusting stars that freeze up and keep you from adjusting your brakes.
Application:Part #: 211609209A
These are the screws and adjusting stars that freeze up and keep you from adjusting your brakes.
Application:Part #: 211611477A
This valve in the wheel cylinder allows you to bleed the brakes.
Application:Part #: 211611483
This valve in the wheel cylinder allows you to bleed the brakes.
Application:Part #: 211698301
This kit is for rebuilding the wheel cylinder.
Application:Part #: 211698291
This kit is for rebuilding the wheel cylinder.
Application:Part #: 211611047F
This hydraulic slave cylinder is found in the rear brake backing plate.
Application:Part #: 211611047C
This hydraulic slave cylinder is found in the rear brake backing plate.
Application:Part #: 113609163
You will find this little plug in the backside of the rear backing plates on cars 1968 and later.
Application:Part #: 211698003A
This kit has all the springs, pins and keepers for drum brakes.
Application:Part #: 211609537J
These shoes or linings are in the rear drums and are new, so no exchange.
Application:Part #: 211609537N
These shoes or linings are in the rear drums and are new, so no exchange.
Application:Part #: 211609537K
These shoes or linings are in the rear drums and are new, so no exchange.
Application:Part #: 211611047FGR
Rear Wheel Brake Cylinder, GERMAN
Application:Part #: 1601141FCH
Silver Center Cap with EMPI Logo, Cap Only
Application:Part #: T1129028
Some carb combo's are tricky to sync, like kadrons that have a stud sticking up.
Application:Part #: 111501303A
Outer Rear Wheel Bearing Spacer
Application:Part #: 1129710
EMPI Single HPMX/IDF Manifold for Type 1 engines
Application:Part #: 1698152P
Premium Replacement pads for your aftermarket Disc Brakes.
Application:Part #: 211919051A
The sending unit registers the fuel level on the gauge.
Application:Part #: 221845321
This seal goes around the side window that is stationary (does not have a frame).
Application:Part #: 1141026
We only offer brand new pressure plates because so-called rebuilt pressure plates never quite come up to factory pressure specs.
Application:Part #: 151847341A
This seal goes between the rear quarter window and the front door side window on a convertible.This is very important if you want to keep your window in..
Application:Part #: 321419779
This bushing goes around the steering shaft up by the steering wheel.
Application:Part #: 211813355IX
This is a repair panel for the rear corner.
Application:Part #: 688110A
Lowback Roadster Style Seats, Black Vinyl with Polished Vent Grommets
Application:Part #: 111801043
Outer Rocker Panel Left
Application:Part #: 113837639A
These locks keep the vent wing closed, therefore a must, but they're a pain to replace.
Application:Part #: 113845101D
These are cut from safety glass as required by law.
Application:Part #: 1601029BK
BRM Wheel, 5x205, 5" wide, Black
Application: