Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N109052
Screws for replacement pop out window frames. These screws are for joining the two Popout frame halves together
Application:This kit allows you to bolt disc brakes onto your Bug king and link pin or ball joint front end.
This kit allows you to bolt disc brakes onto your Bug king and link pin or ball joint front end. The kit comes with rotors, calipers, seals, lock tabs, and mounting bolts. Non lowered kits also come with front wheel bearings. If your Bug is a 66 or earlier, you'll need the master cylinder off a 1967 or later Bug. Also the reconditioned spindle kit is sold on an exchange basis. We do not recommend front disc brakes on off road cars, because you'll get in a lot of trouble in the dirt unless you have some kind of proportioning valve.
Bug (Type 1): -65
Ghia: 56-65
No customer reviews for the moment.
Part #: 255853345
These chrome moldings for American style seals go around the windows and are just for looks.
Application:Part #: 151853111B
Door Panel Molding Set 6 pcs Convertible Only
Application:Part #: 211611475A
This valve in the wheel cylinder allows you to bleed the brakes.
Application:Part #: 141971116
The electrical harness runs everything on the car.
Application:Part #: 151871204
These are the rear quarter wedges for your convertible..
Application:Part #: 6415660
This billet aluminum steering wheel is precision machined and finished polished for a real shine.
Application:Part #: 311863341A
This boot goes over the E-brake handle to hide the cables.
Application:Part #: 131415371B
Pitman Arm
Application:Part #: 131611055
Rear Wheel Cylinder
Application:Part #: 11094011
Rocker Arms Kit, HP Stock 1.1
Application:Part #: 265809041B
Side Panel, Crew Cab Only, Left
Application:Part #: 133945224A
These are the rear lenses for the tail light, brake light and turn signal light.
Application:Part #: 211415049BCO
Due to the core shortage we will need you to send in your old steering box first.
Application:Part #: 141953165C
This seals the front turn signal housing from the fender.
Application:Part #: 1127100
Hose Clamp for 5mm hose
Application: