Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N109052
Screws for replacement pop out window frames. These screws are for joining the two Popout frame halves together
Application:The oil pump is the heart of the engine, so it is very important to choose the right one.
The oil pump is the heart of the engine, so it is very important to choose the right one. When ordering a pump you will need to know if your case is a single or dual relief, if you have a dished or a flat cam and if you want a standard or heavy duty pump. Remember that you can only pump so much oil through a certain size hole, so be careful in ordering a heavy duty pump. We feel that any pump with gears larger than 30mm is a waste of money. Note: When replacing a pump make sure you use four new sealing nuts.
Bug (Type 1): 70-71
Bus (Type 2): 70-71
Type 3: 70-71
Ghia: 70-71
Race/Off-Road: 70-71
No customer reviews for the moment.
Part #: 1115457BK
The smooth flow design has a nice look and comes with a knurled cross-groove or smooth billet grooved cap for a good grip when it is wet or oily. Black
Application:Part #: 1117107
When plumbing the oil filter, oil cooler and/or case, these are the fittings you will need.
Application:Part #: 1117023
Mesa coolers are the state of the art oil coolers.
Application:Part #: 111115175B
This screen fits in the sump around the pick up tube.
Application:Part #: 040101149
Oil pick up Pipe
Application:Part #: N110062
Some of the more common nuts you might need..
Application:Part #: 1119031
Replacement fan
Application:Part #: JC22250
Jaycee Billet Oil Cap with Breater -10 AN Fitting, Red
Application:Part #: JC22220
Jaycee Billet Oil Cap with Breater #8 AN Fitting, Black
Application:Part #: 311115541
This boot goes on the end of the dump tube.
Application:Part #: 1117103
When plumbing the oil filter, oil cooler and/or case, these are the fittings you will need.
Application:Part #: 1115183BK
This plate is made out of a solid piece of aluminum. Black
Application:Part #: 113117321
Hoover Bit, Oil Cooler Sealing Frame
Application:Part #: 1117024FAN
This is the same as the mesa cooler but with a fan mounted to it.
Application:Part #: 111115161
These nuts prevent oil from leaking around the oil pump studs.
Application:Part #: 1117101ALM
These fittings are used for the stainless steel hose.
Application: