Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
These shims are used with the Solid Shaft Rocker Kit.
These shims are used with the Solid Shaft Rocker Kit. Even though the rocker kit comes with shims, you many need more. When you run solid shafts, it's very important they are shimmed correctly.
Bug (Type 1): 40hp-1600
Bus (Type 2): 40hp-1600
Type 3: 40hp-1600
Ghia: 40hp-1600
Thing: 40hp-1600
Race/Off-Road: 40hp-1600
No customer reviews for the moment.
Part #: 1109605
Stainless steel valves are used in the big valve heads.
Application:Part #: 113109021GBR
We've had no luck with regrinds, therefore we sell only new camshafts.
Application:Part #: 1109341EA
Push Rod Tubes, Adjustable Big-Mouth, Each
Application:Part #: 1109001
Engle cams are one of the most popular performance camshafts made for the air-cooled Volkswagen.
Application:Part #: 1109613
Stainless steel valves are used in the big valve heads.
Application:Part #: 11094011
Rocker Arms Kit, HP Stock 1.1
Application:Part #: 1109461
These shims are used under the rockers to set the geometry.
Application:Part #: 1109430
These shims are used under the rockers to set the geometry.
Application:Part #: 1109302
These push rods are made out of chromoly steel and do not expand at the same rate as aluminum.
Application:Part #: 1109401125
Rocker Arms, High Ratio 1.25, w/Bushing, Set
Application:Part #: 111109325
Push Rod Guide, 25-36 HP, Each
Application:Part #: 111109601A
Intake Valve 30mm (each)
Application:Part #: 311109335
These tubes go from the case to the heads to house the push rods.
Application:Part #: 1109641
If you are going to run dual springs we suggest you use these valve spring retainers as well.
Application:Part #: 111109345
Push Rod tube seal for 36 HP
Application:Part #: 111109611A
Exhaust Valve 36 HP
Application:
These shims are used with the Solid Shaft Rocker Kit.
