Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
Scat 5.600 "I" Street Connecting Rods Set of 4
Scat 5.600 "I" Street Connecting Rods Set of 4
Offroad/Race: All
No customer reviews for the moment.
Part #: 1903032CH
These are the three pieces of tin that go on the back of the generator or alternator.
Application:Part #: 2405311
These drop spindles are designed for late buses (68-79). These Spindles require using 73 and later Brake Components.
Application:Part #: 141837475C
Outside Scraper, Rubber Only
Application:Part #: 211945241A
These are the rear lenses for the tail light, brake light and turn signal light.
Application:Part #: 1415417BK
Urethane Steering Coupler Black
Application:Part #: 2847102WH
This makes the rear window pop out like the front windows.
Application:Part #: 1251005
We like to run EMPI deluxe headers because they have the best fit, as well as, a good merge on the collector.
Application:Part #: 113141701E
This shaft holds the throw-out bearing in place.
Application:Part #: 6115468E
These are a nice unit and much better for off road cars than the cast aluminum breather box.
Application:Part #: 241857635
Coat Hook, Deluxe Bus, Anodized Aluminum finish
Application:Part #: 113903141B
The generator strap goes around the generator and holds the generator to the stand..
Application:Part #: 1415057
EMPI Polished Billet Aluminum Steering Wheel Boss Kit
Application:Part #: 1129026
34 Pict Carburetor spacer plate, measures 3/8" thick with 2 11/16" hole to hole
Application:Part #: 211119515
Front Engine Tin with Doghouse Cooler
Application:Part #: 211813164N
This is what the battery sits on.
Application:Part #: 113847101B
Popout Window Glass
Application:
Scat 5.600 "I" Street Connecting Rods Set of 4