Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
Rear Wheel Brake Cylinder CHINA
Rear Wheel Brake Cylinder 17mm CHINA
Bug (Type 1): 52-57
Ghia: -57
Offroad/Race: -57
No customer reviews for the moment.
Part #: 111821021D
These new front fenders are not as thick as the original German fenders.
Application:Part #: JC44450
Jaycee Billet IDA Stacks, Red, Each
Application:Part #: 211703622A
Jack Support, Front Right
Application:Part #: 1101351
Whether your motor lives or not can depend upon this little shim.
Application:Part #: 111701700
It's the law and a good idea to have seat belts.
Application:Part #: 2101000
This is for converting a non hanger case to accept a hanger.
Application:Part #: 211971014
The electrical harness runs everything on the car.
Application:Part #: 1101382
Whether your motor lives or not can depend upon this little shim.
Application:Part #: 6721559
These are heavy, heavy duty cables.
Application:Part #: 113251163C
Tail pipes route the exhaust out of the back of the stock muffler..
Application:Part #: 6707301CH
These bumpers are made for Baja Bugs.
Application:Part #: 211501615A
The rear wheel attaches to the rear brake drum.
Application:Part #: 113945109
These reflectors came on the side of the 71-72 Bug tail light housings.
Application:Part #: 111819189B
Heater Vent, Plastic, LH
Application:Part #: 1198026A
This kit contains a quality urethane bushing, a clutch return spring and retaining clips needed to install the throw-out bearing arm in the transmission.
Application:
Rear Wheel Brake Cylinder CHINA