Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
When you mount the middle seat, you'll want the rubber mat down and the bolts in the key slots first.
When you mount the middle seat, you'll want the rubber mat down and the bolts in the key slots first. Then place the mounting plates into the holes of the mat. Now place the seat on the plates and slide the hooks over the bolts and thread the nuts down and tighten them. The rear seat doesn't sit on a mat so you don't use the mounting plates, just the hooks and nuts.
Bug (Type 1): -55
Bus (Type 2): 55-67
No customer reviews for the moment.
Part #: N161371
When you mount the middle seat, you'll want the rubber mat down and the bolts in the key slots first.
Application:Part #: 221883861A
When you mount the middle seat, you'll want the rubber mat down and the bolts in the key slots first.
Application:Part #: 111881285
When you mount the middle seat, you'll want the rubber mat down and the bolts in the key slots first.
Application:Part #: 113837020B
These handles go on the inside of the front doors to open them.
Application:Part #: 211867161IV
This handle pulls the front doors closed..
Application:Part #: N108661
Turn Signal Screws Set of 4
Application:Part #: 113701571A
This seal goes around the plate that's between the front end tubes.
Application:Part #: 025109337
Collapsible Push Rod Tube
Application:Part #: 211615107A
Front calipers hold the brake pads that stop the rotor, which in turn stops your vehicle. If you are ordering this without sending your core in first you will need to order the core as well. The core charge will be refunded when we get your core back and it is rebuildable.
Application:Part #: 6201550
Spun aluminum gas tanks for Buggies, come with either end fill or center fill option.
Application:Part #: 113119585B
These seals go over the stock H pipes where they come through the front pulley tin.
Application:Part #: 2711197
Delrin front shift rod bushing
Application:Bus (Type 2); 66-73
Part #: 68012024
Set of 4 Universal Mounting Tabs with 3/8" hole
Application:Part #: 6115349
If you built your motor out of a type 3 case, you probably notice that once you got it all together you're missing a dipstick tube.
Application:Part #: 1301185
This heavy duty side plate keeps the ring and pinion where it's supposed to be.
Application:Part #: 141831712A
Front door seals keep out the wind, rain, dirt and noise.
Application:Part #: 6801041
This bar for Baja Bugs is made so you can mount up to four light on the roof.
Application:Part #: 211703652
Rear Apron Mount Bracket, Right
Application:Part #: 211809101E
This is the most common place for rust on your bus.
Application:
When you mount the middle seat, you'll want the rubber mat down and the bolts in the key slots first.
