Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
This bushing is made to mate mismatched bellhousing and starter combinations.
This bushing is made to mate mismatched bellhousing and starter combinations. When installing, be careful not to mushroom the inner diameter.
Bug (Type 1): All
Bus (Type 2): All
Type 3: All
Ghia: All
Race/Off-Road: All
No customer reviews for the moment.
Part #: SR15NC
This is what starts the car.
Application:Part #: SR11XCO
This is what starts the car.
Application:Part #: 113119031B
This is the fan that fits inside of the fan shroud on Bugs 1971-1979 and a 1971 Bus.
Application:Part #: 111903137E
This is the belt that turns the generator.
Application:Part #: 111119270B
This is a hub that is keyed onto the generator or alternator to mount the fan.
Application:Part #: SR28X
This is what starts the car.
Application:Part #: 111119141A
Cooling Fan Nut
Application:Part #: 30048
This little box tells the Alternator what to do.
Application:Part #: 042903109ABR
This is the pulley on the generator that holds the belt.
Application:Part #: 1903141B
This strap is much stronger than the stock strap, not that you need a super strap to hold the alternator or generator.
Application:Part #: 30019
This little box tells the generator what to do.
Application:Part #: AL75XCO
This unit supplies the battery with voltage.
Application:Part #: 1903531
On all upright motor, this plastic cover goes over the top opening of the generator to keep dirt out.
Application:Part #: 1903109BOBK
Billet Pulley Outer Half Black
Application:Part #: 043903109BR
This is the pulley on the generator that holds the belt.
Application:Part #: 113903141A
The generator strap goes around the generator and holds the generator to the stand..
Application:
This bushing is made to mate mismatched bellhousing and starter combinations.
