Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
Exhaust Valve Guide 9mm
Exhaust Valve Guide 9mm
Bug (Type 1): 75-79
No customer reviews for the moment.
Part #: 111971117
The electrical harness runs everything on the car.
Application:Part #: 211199231CGR
They mount on the crossbar of 68 and later Buses.
Application:Part #: 311881403
Like the door panels, seat covers are a long subject; so here's the basics
Application:Part #: 1615107H
Replacement Front Brake Bracket for Kit # 1615100STK, 6615101, Each
Application:Part #: 6707302
These bumpers are made for Baja Bugs.
Application:Part #: 221867504
This is the vinyl covering for the inside roof and sides of the Bus.
Application:Part #: 111953161JCL
These are the lenses that go over the front turn signal bulb holders.
Application:Part #: 1117007SS
This is the high-temp/pressure hose wrapped with braided stainless steel.
Application:Part #: 111881364
This is the padding that sits on top of the springs of the seat.
Application:Part #: 111698173A
This is the kit to rebuild the master cylinder.
Application:
30th Anniversary T-Shirts are in! Don't miss your chance to get these one of a kind, glow in the dark tees. With the gang certified member logo on one sleeve and the wolfgang racing logo on the other sleeve, help us celebrate our 30th anniversary!
Application:Part #: 1711143BR
These knobs with the Empi logo are made to fit all stock shifters.
Application:Part #: 211883369
This is the padding that sits on top of the springs of the seat.
Application:Part #: 211707197A
Bumper End Unit Seals
Application:Part #: 025121403A
This tank is part of the cooling system..
Application:Part #: 1119024
Remote coil mounts are used when you want to keep the coil on the motor, yet out of the way of down linkage on dual carburetors..
Application:
Exhaust Valve Guide 9mm