Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
This is the bushing between the bellhousing of the transmission and the starter.
This is the bushing between the bellhousing of the transmission and the starter. If you have the starter out, it's a good time to check the bushing. Note: When installing a starter, be sure you grease the bushing to prolong it's life.
Bug (Type 1): 67-79
Bus (Type 2): 67-79
Type 3: 67-74
Ghia: 67-74
Thing: 73-74
Race/Off-Road: 67-
No customer reviews for the moment.
Part #: 111398003
Transmission gasket set.
Application:Bug (Type 1); -60
Bus (Type 2); -59
Ghia; -60
Part #: 211301205H
This is the front of the transmission that houses the shift lever.
Application:Part #: 113301229A
This is the front of the transmission that houses the shift lever.
Application:Part #: 001301083
This seal keeps the fluid in the converter.
Application:Part #: 111301289B
This boot goes around the nose cone to seal up the hole where it comes through the pan.
Application:Part #: 111301207
Nose Cone Bushing, Front or Rear, Early
Application:Part #: 113701173
This bracket is part of the torsion housing.
Application:Part #: 1301048I
Padded Trans Support Front Kit
Application:Part #: 111301289
Nose Cone Boot
Application:Part #: 1301184
This heavy duty side plate keeps the ring and pinion where it's supposed to be.
Application:Part #: 001301209A
Nose Cone Seal Holder
Application:Part #: 6501141
These retainers help stiffen the plates that bolts the tubes to the trans.
Application:Part #: 1301051
High performance street cars or off road cars have been known to crack stock transmission cases.
Application:Part #: 113301189F
These are the seals that go around the final drives on an IRS transmission.
Application:Part #: 311301265B
These rubber mounts hold the transmission in place.
Application:Part #: 1311123
This steel thrust plate stops movement of the main shaft bearing and aids in the keepin the alignment of the gears on the main and pinion shafts.
Application:
This is the bushing between the bellhousing of the transmission and the starter.
