Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:This air cleaner takes the place of a stock air cleaner.
This air cleaner takes the place of a stock air cleaner. They flow better than the original air cleaner. If you live on a dusty road, we suggest you buy a better air cleaner than this or stay with stock and clean it frequently. These air cleaners are basically for street driven vehicles.
Bug (Type 1): 36hp-1600
Ghia: 36hp-1600
Thing: 36hp-1600
No customer reviews for the moment.
Part #: 1127110ALM
This is stainless steel braided fuel line.
Application:Part #: 113129710D
Dual Port Manifold End Casting - Right
Application:Part #: 1129718
These gaskets are for upright dual port engines.
Application:Part #: 1127108ALF
This is stainless steel braided fuel line.
Application:Part #: 113127511A
Fuel Line, Metal, 6mm Pump to Carburetor
Application:Part #: N138211
These are the gaskets used between the intake manifold and the cylinder head.
Application:Part #: 111127141
Fuel Pump Diaphragm 25-36 HP
Application:Part #: 311133263
Fuel injection seal large
Application:Part #: 111127511A
This metal line goes from the pump around the fan shroud to the flex line that comes from the gas tank.
Application:Part #: 111198555
This kit allows you to rebuild your square top or 40hp fuel pump.
Application:Part #: 043129707
Intake Manifold Block
Application:Part #: 1127106ALM
This is stainless steel braided fuel line.
Application:Part #: 1127110
This is a brass tee for dual carbs.
Application:Part #: 1127022BK
Billet Fuel Pump Block off, Black
Application:Part #: 113127307
This rod drives the fuel pump.
Application:Part #: 1129709
This pair of aluminum end castings are for use with a center section manifold.
Application: