Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
This is the best air cleaner for those of you playing in wet and muddy off-road areas.
This is the best air cleaner for those of you playing in wet and muddy off-road areas. It's hooded so water doesn't get in and it's a great air cleaner too. It comes with a gauze element. Use a thin layer of grease on the outer edges of the element to seal it to the top and bottom. Two other tips are to use a roofing washer under the wing nut and to drill a small hole in the stud and put a safety pin through it to keep the wing nut from backing off. You will also need to buy the rubber adapter to mount it to your carb. A stock carb has a 2" neck.
Off-Road: All
No customer reviews for the moment.
Part #: 1127106ALM
This is stainless steel braided fuel line.
Application:Part #: VCP25
This is a rubber plug that is used to plug off vacuum.
Application:Part #: 6129650593P
Outerwear pre-filters feature a patented; Micro Mesh nylon filtration system that stops sand and dirt before it gets to your air cleaner element.
Application:Part #: 1129025
This is a new aftermarket UNIVERSAL intake manifold for Dual Port Engines. You can use a 30 Pict1 or 34Pict3 Carburetor. We have had major icing problems with this part and prefer stock manifolds.
Application:Part #: 113127307
This rod drives the fuel pump.
Application:Part #: 113127311
These stock pumps pump fuel into the carburetor.
Application:Part #: 113127303
The fuel pump sits on this little stand and it's also the guide for the push rod.
Application:Part #: 113127521AWG
This metal line goes from the pump around the fan shroud to the flex line that comes from the gas tank.
Application:Part #: 1129601HD6
This is a replacement air cleaner for the Weber IDF.
Application:Part #: 1129601HD
This is a replacement air cleaner for the Weber IDF.
Application:Part #: 1127103ALM
This is stainless steel braided fuel line.
Application:Part #: 111198555
This kit allows you to rebuild your square top or 40hp fuel pump.
Application:Part #: VCP12
This is a rubber plug that is used to plug off vacuum.
Application:Part #: 6129652BK
Outerwear pre-filters feature a patented; Micro Mesh nylon filtration system that stops sand and dirt before it gets to your air cleaner element.
Application:Part #: 1127112
This regulator adjusts the fuel pressure to you carburator.
Application:Part #: 113129729BS
These boots connect the intake manifold with the end casting on a stock dual port 1600cc engine. Two are required boots are sold individually.
Application:
This is the best air cleaner for those of you playing in wet and muddy off-road areas.
